• Digisens Slider 4

DYNAMIC AND STATIC WEIGHING ON VEHICLES

The polluter-pays principle in waste disposal is becoming increasingly widespread worldwide. Recording the weight is much fairer for the polluter than billing by volume. For this reason, a large proportion of refuse collection vehicles are now equipped with scales. A distinction is made between on-board weighing and dynamic weighing systems. DIGI SENS offers both solutions in different variants. The on-board weighing system, which records the entire payload of the truck, is particularly suitable for billing between collection areas or for large industrial customers.

Voices from the market:

"For the equipment of our waste disposal vehicles we have been relying on components from DIGI SENS for years. You can simply count on this technology!"

With the dynamic weighing system of DIGI SENS the weight recording of gross and tare is done in motion without slowing down the lifting process. This saves valuable time on the daily route.

Our latest generation of weighing calculator, the ELEIRO, has a Y(a) certification and is therefore able to weigh waste according to the most accurate class.

Waste truck with DIGI SENS scale during the lifting

Waste truck with DIGI SENS scale during the lifting

Dynamic weighing from DIGI SENS on RCV

Dynamic weighing from DIGI SENS on RCV

Integrated dynamic weighing system on front loaders

Integrated dynamic weighing system on front loaders

Dynamic scale for foundry robots

Dynamic scale for foundry robots

Front loader truck with DIGI SENS scales

Front loader truck with DIGI SENS scales

Integrated on board scale on a milk tank truck

Integrated on board scale on a milk tank truck

The dynamic weighing system of DIGI SENS basically consists of three different components:

  • The load cell of type SO, SNC or SA with our unique and highly precise oscillating wire sensor with OIML R60 approval
  • The type BB acceleration cell or type BJ tilt cell to compensate for tilting and movement acceleration
  • The evaluation computer ELEIRO for certified collection applications

 

Different applications on waste disposal vehicles

ELEIRO weighing computer for certified weighing applications

ELEIRO weighing computer for certified weighing applications

Load cells type SO1500Kg or 7500Kg

Load cells type SO1500Kg or 7500Kg

Acceleration cells type BB

Acceleration cells type BB

Rear Loader

ELEIRO weighing computer

S030E 07 ELEIRO

The ELEIRO weighing computer is used for the evaluation and further processing of the measured data from DIGI SENS transducers. It is especially designed for applications where the load cell signals have to be linked in real time, often by using complex algorithms. The ELEIRO calculator has an OIML certificate and is therefore predestined for certified weighing applications.

Load cell type SO

S006E 08 Load Cell SO

The load cells of the type ED21/SO 1'500Kg and 7'500Kg have been specially designed for use on refuse collection vehicles and allow, in combination with a weighing computer, calibrated weighing.

Acceleration cell type BB

S046E 03 Accelerometer BB4W

The BB Acceleration Cell measures the acceleration by means of a differential silicon capacitor, where the deflection of the middle capacitor plate is measured. It was developed especially for dynamic weighing.

ELEIRO TOUCH

S048E 04 ELEIRO TOUCH

The ELEIRO Touch is the user terminal for the ELEIRO weighing computer. The touch screen provides easy and intuitive access to the complete user menu of the ELEIRO. The display shows the measurement results and the operating modes.

  • ELEIRO weighing computer

    S030E 07 ELEIRO

    The ELEIRO weighing computer is used for the evaluation and further processing of the measured data from DIGI SENS transducers. It is especially designed for applications where the load cell signals have to be linked in real time, often by using complex algorithms. The ELEIRO calculator has an OIML certificate and is therefore predestined for certified weighing applications.

  • Load cell type SO

    S006E 08 Load Cell SO

    The load cells of the type ED21/SO 1'500Kg and 7'500Kg have been specially designed for use on refuse collection vehicles and allow, in combination with a weighing computer, calibrated weighing.

  • Acceleration cell type BB

    S046E 03 Accelerometer BB4W

    The BB Acceleration Cell measures the acceleration by means of a differential silicon capacitor, where the deflection of the middle capacitor plate is measured. It was developed especially for dynamic weighing.

  • ELEIRO TOUCH

    S048E 04 ELEIRO TOUCH

    The ELEIRO Touch is the user terminal for the ELEIRO weighing computer. The touch screen provides easy and intuitive access to the complete user menu of the ELEIRO. The display shows the measurement results and the operating modes.

  1. ELEIRO
  2. Load cell type SO
  3. Acceleration cell type BB
  4. ELEIRO Touch

 

Front loader

ELEIRO weighing computer

S030E 07 ELEIRO

The ELEIRO weighing computer is used for the evaluation and further processing of the measured data from DIGI SENS transducers. It is especially designed for applications where the load cell signals have to be linked in real time, often by using complex algorithms. The ELEIRO calculator has an OIML certificate and is therefore predestined for certified weighing applications.

Load cell type SO

S006E 08 Load Cell SO

The load cells of the type ED21/SO 1'500Kg and 7'500Kg have been specially designed for use on refuse collection vehicles and allow, in combination with a weighing computer, calibrated weighing.

Acceleration cell type BB

S046E 03 Accelerometer BB4W

The BB Acceleration Cell measures the acceleration by means of a differential silicon capacitor, where the deflection of the middle capacitor plate is measured. It was developed especially for dynamic weighing.

ELEIRO TOUCH

S048E 04 ELEIRO TOUCH

The ELEIRO Touch is the user terminal for the ELEIRO weighing computer. The touch screen provides easy and intuitive access to the complete user menu of the ELEIRO. The display shows the measurement results and the operating modes.

  • ELEIRO weighing computer

    S030E 07 ELEIRO

    The ELEIRO weighing computer is used for the evaluation and further processing of the measured data from DIGI SENS transducers. It is especially designed for applications where the load cell signals have to be linked in real time, often by using complex algorithms. The ELEIRO calculator has an OIML certificate and is therefore predestined for certified weighing applications.

  • Load cell type SO

    S006E 08 Load Cell SO

    The load cells of the type ED21/SO 1'500Kg and 7'500Kg have been specially designed for use on refuse collection vehicles and allow, in combination with a weighing computer, calibrated weighing.

  • Acceleration cell type BB

    S046E 03 Accelerometer BB4W

    The BB Acceleration Cell measures the acceleration by means of a differential silicon capacitor, where the deflection of the middle capacitor plate is measured. It was developed especially for dynamic weighing.

  • ELEIRO TOUCH

    S048E 04 ELEIRO TOUCH

    The ELEIRO Touch is the user terminal for the ELEIRO weighing computer. The touch screen provides easy and intuitive access to the complete user menu of the ELEIRO. The display shows the measurement results and the operating modes.

  1. ELEIRO
  2. Load cell type SO
  3. Acceleration cell type BB
  4. ELEIRO Touch

 

Side loader

ELEIRO weighing computer

S030E 07 ELEIRO

The ELEIRO weighing computer is used for the evaluation and further processing of the measured data from DIGI SENS transducers. It is especially designed for applications where the load cell signals have to be linked in real time, often by using complex algorithms. The ELEIRO calculator has an OIML certificate and is therefore predestined for certified weighing applications.

Load cell type SO

S006E 08 Load Cell SO

The load cells of the type ED21/SO 1'500Kg and 7'500Kg have been specially designed for use on refuse collection vehicles and allow, in combination with a weighing computer, calibrated weighing.

Acceleration cell type BB

S046E 03 Accelerometer BB4W

The BB Acceleration Cell measures the acceleration by means of a differential silicon capacitor, where the deflection of the middle capacitor plate is measured. It was developed especially for dynamic weighing.

ELEIRO TOUCH

S048E 04 ELEIRO TOUCH

The ELEIRO Touch is the user terminal for the ELEIRO weighing computer. The touch screen provides easy and intuitive access to the complete user menu of the ELEIRO. The display shows the measurement results and the operating modes.

  • ELEIRO weighing computer

    S030E 07 ELEIRO

    The ELEIRO weighing computer is used for the evaluation and further processing of the measured data from DIGI SENS transducers. It is especially designed for applications where the load cell signals have to be linked in real time, often by using complex algorithms. The ELEIRO calculator has an OIML certificate and is therefore predestined for certified weighing applications.

  • Load cell type SO

    S006E 08 Load Cell SO

    The load cells of the type ED21/SO 1'500Kg and 7'500Kg have been specially designed for use on refuse collection vehicles and allow, in combination with a weighing computer, calibrated weighing.

  • Acceleration cell type BB

    S046E 03 Accelerometer BB4W

    The BB Acceleration Cell measures the acceleration by means of a differential silicon capacitor, where the deflection of the middle capacitor plate is measured. It was developed especially for dynamic weighing.

  • ELEIRO TOUCH

    S048E 04 ELEIRO TOUCH

    The ELEIRO Touch is the user terminal for the ELEIRO weighing computer. The touch screen provides easy and intuitive access to the complete user menu of the ELEIRO. The display shows the measurement results and the operating modes.

  1. ELEIRO
  2. Load cell type SO
  3. Acceleration cell type BB
  4. ELEIRO Touch

 

On board weighing

ELEIRO weighing computer

S030E 07 ELEIRO

The ELEIRO weighing computer is used for the evaluation and further processing of the measured data from DIGI SENS transducers. It is especially designed for applications where the load cell signals have to be linked in real time, often by using complex algorithms. The ELEIRO calculator has an OIML certificate and is therefore predestined for certified weighing applications.

Load cell type SA

S007E 04 Load Cell SA

The load cells of the type ED21/SA 10'000Kg have been specially designed for use on trucks and, in combination with a weighing computer, permit legal-for-trade onboard weighing.

Load cell type SA

S007E 04 Load Cell SA

The load cells of the type ED21/SA 10'000Kg have been specially designed for use on trucks and, in combination with a weighing computer, permit legal-for-trade onboard weighing.

Tilt cell type BJ

S008E 04 Inclinometer BJ

The BJ tilt cell measures the inclination to the gravity by means of two differential capacitors made of silicon and is designed for use with a DIGI SENS processing computer. Based on the measured inclinations, the compensation of the weight values determined by the load cells are possible.

ELEIRO Touch

S048E 04 ELEIRO TOUCH

The ELEIRO Touch is the user terminal for the ELEIRO weighing computer. The touch screen provides easy and intuitive access to the complete user menu of the ELEIRO. The display shows the measurement results and the operating modes.

  • ELEIRO weighing computer

    S030E 07 ELEIRO

    The ELEIRO weighing computer is used for the evaluation and further processing of the measured data from DIGI SENS transducers. It is especially designed for applications where the load cell signals have to be linked in real time, often by using complex algorithms. The ELEIRO calculator has an OIML certificate and is therefore predestined for certified weighing applications.

  • Load cell type SA

    S007E 04 Load Cell SA

    The load cells of the type ED21/SA 10'000Kg have been specially designed for use on trucks and, in combination with a weighing computer, permit legal-for-trade onboard weighing.

  • Load cell type SA

    S007E 04 Load Cell SA

    The load cells of the type ED21/SA 10'000Kg have been specially designed for use on trucks and, in combination with a weighing computer, permit legal-for-trade onboard weighing.

  • Tilt cell type BJ

    S008E 04 Inclinometer BJ

    The BJ tilt cell measures the inclination to the gravity by means of two differential capacitors made of silicon and is designed for use with a DIGI SENS processing computer. Based on the measured inclinations, the compensation of the weight values determined by the load cells are possible.

  • ELEIRO Touch

    S048E 04 ELEIRO TOUCH

    The ELEIRO Touch is the user terminal for the ELEIRO weighing computer. The touch screen provides easy and intuitive access to the complete user menu of the ELEIRO. The display shows the measurement results and the operating modes.

  1. ELEIRO
  2. Load cell type SA
  3. Tilt cell type BJ
  4. ELEIRO Touch

 

This website uses cookies to improve the user-friendliness. With the usage of our webseite you permit us to use cookies.